Instructions

Click here to download instructions for the M.A.X.™.

How To Video

[Media]

How do I update M.A.X.™?

Go to http://meccano.com/meccanoid-robot-updater.Download the Robot Update software listed under your operating system (Windows or MAC).Inst...

The volume on my robot is too low/too high. How can I change my robot's volume?

Make sure M.A.X.™ is in Robot Mode and speak the command "Set Volume”. M.A.X.™ will instruct you how to alter the volume!

What languages are currently supported on M.A.X.™?

M.A.X.™ is currently supported in the following languages: English (US) English (UK) Spanish

I'm having trouble with my build. How long should this take?

On average, building the M.A.X.™,  should take approximately 1.5 - 2 hours.

How can I change my robot's name?

While connected with your robot, simply navigate to the More section while in the Remote Controller and tap on “Rename Robot”.

What do I do if my robot says “Help! My servo’s stuck. Can you help a robot out?”

This error message will be reported if the servo attempts to reach a position and cannot within a normal time frame or fails entirely to mov...

What are all the ports on the MeccaBrain™ for?

The ports numbered 1-4 are for Meccano Smart modules such as the Smart Servos or Smart RGB LEDs (the robot’s eyes). The ports marked as “LM”...

How many Smart Modules can be put into the numbered ports?

The Smart Servos can daisy-chain (one can be plugged into another to form a string of servos). A maximum of 4 Smart modules can be plugged i...

How many Smart Servos can be plugged into the MeccaBrain?

A maximum of 12 smart Servos can be plugged into the MeccaBrain™ at one time.

How do I program the MeccaBrain™?

At this time, the MeccaBrain™ can only be controlled using the app for your smart device. In an upcoming update, the app will allow you to c...

My robot is not driving correctly, how do I fix it?

Please double-check the wiring connection of the foot motors.The wires going to “LM” on the MeccaBrain™ should be connected to the robot's l...

My robot doesn't seem to function as expected, how do I fix it?

If you are having trouble with M.A.X.™, please update the robot’s code to the most recent version. Click HERE to download the Robo...

M.A.X.™ is not responding to my voice commands, how do I fix it?

M.A.X.™ uses active listening. Therefore, when M.A.X.™ is talking, M.A.X.™ cannot hear what you are saying. When talking, try not...

What does Drone Mode do?

When you have built M.A.X.™ as a robot, you will want to make sure you are in Robot mode. On the back of the MeccaBrain™, there is a sw...

Are the features of the Drone mode and the Robot mode similar?

Voice Commands:In Drone mode, certain voice commands (such as “Settings”, “Forward”, “Backward”, “Left Turn”, etc.) will still work, but oth...

How long should I charge M.A.X.™ before using for the first time?

Charging the battery takes approximately 4 – 6 hours. When the battery is fully charged, the light on the charger will turn GREEN. We recomm...

The batteries on my M.A.X.™ don't seem to last very long. How can I optimize my robot's battery?

If you haven't updated your software since purchasing your robot, you will find that a software update will help to improve your robot's bat...

What are the specs for the rechargeable battery?

M.A.X.™ comes with a 6V, 1800 mAh rechargeable Nickel Metal Hydride battery.

How can I change my robot's name?

While connected with your robot, simply navigate to the More section while in the Remote Controller and tap on “Rename Robot”.

How do I use the Face Creator?

Select a funny face from the Randomizer. Replace the LED screen with your small device. You must unplug M.A.X.™’s faceplate from the holder ...

The volume on my robot is too low/too high. How can I change my robot's volume?

Make sure M.A.X.™ is in Robot Mode and speak the command "Set Volume”. M.A.X.™ will instruct you how to alter the volume.

What are all the ports on the MeccaBrain™ for?

The ports numbered 1-4 are for Meccano™ Smart modules such as the Smart Servos or Smart RGB LEDs (the robot’s eyes). The ports marked as “LM...

How do I delete a sound file I have previously recorded?

To delete a sound file, press and hold down on the file and drag it up to the trash can.

What do I do if my robot's claw is not working correctly?

Make sure that the robot has been built properly, including the modules are connected in the proper order in the correct locations of the Me...